Product Description:

Understanding that nursing care is very hard, we have researched and designed SWITLE BODY bathing equipment with built-in warm water and shower gel utilities integrated on one device. This product aims to help clean and bathe the patient in a lying position without wetting the bed. The design is compact and easy to use.

Working principle of Switle Body nursing bath equipment:

With only 1 caregiver, the patient can lie on the bed and can be cleaned easily, safely, and comfortably with a specialized mild acidic soap without wetting or dirtying the bed!

Hot water can be adjusted from 38℃ ~ 42℃ as desired. Adjust the water temperature according to the season or environment. The process of pre-washing, bathing, and rinsing with only about 1 liter of water can save water because it only uses the minimum amount of water needed.

Switle Body User Manual - Bathing Equipment in Nursing Care

How to use Switle Body for bathing:

• Step 1. Install the sponge head.
• Step 2. Turn on the power, point the head toward the basin, press and hold the water spray button, check if the water is sprayed (water is flowing).
• Step 3. If the water flows, adjust the temperature (Switch between normal temperature/hot water mode. When the power is turned on, it will be in normal temperature mode).
  Press the button to switch between normal temperature/hot water.
  Press the button to adjust the temperature, the water temperature can be set to 38℃～42℃ in 1℃ units.
• Step 4. If you use it on the bed or blanket, you need to put a towel, etc. around.
• Step 5. Place the sponge head close to the skin, press and hold the water spray/suction button to bathe. When releasing the water spray/suction button, the water is still sucked for 5 seconds.
  Correct usage: Place the sponge head close to the skin.
  Incorrect usage: If the sponge head is not close to the skin, water may leak.
• Step 6. Hold the shower head slightly away from the skin, press and hold the dedicated soap button to let the soap flow out. After spraying an appropriate amount, release the button, rub with a sponge brush.
• Step 7. Press the water spray button again, close to the skin and rinse off the soap. Absorb the remaining water with the suction mode of the body. And wipe with a towel if necessary.

 How to use Switle Body for hair washing:

• Step 1. Install the silicone head.
• Step 2. Place the silicone head close to the hair (head), press and hold the water spray/suction button to wash hair. Continue to suck water for 5 seconds after releasing the water suction/discharge button.
• Step 3. Use the silicone head to comb hair from top to bottom, following the direction of the hair. When washing hair by rubbing an area in many directions, hair can get caught in the comb, causing hair breakage or hair loss.
• Step 4. After the entire hair is wet, spray an appropriate amount of specialized soap.
• Step 5. Move the silicone head from top to bottom like using a comb to apply specialized soap.
• Step 6. Rinse the soap off again with movements 2 ~ 3
• Step 7. After rinsing off the soap, if the hair is still damp, dry it with a towel.

How to clean Switle Body:

• Turn off the power, unplug the plug from the socket before cleaning.
• Must be cleaned after use.
• If the exterior of the body is dirty, wipe it with a soft cloth to clean.

If it is too dirty, use a cloth soaked in neutral detergent diluted with water to wipe.

Wipe off the water, dry to finish. If cleaning with hard materials such as brushes, etc. it may cause scratches. In addition, do not wash by spraying water directly on the machine because it may cause damage.

Note:

• After cleaning, dry completely and reinstall.
• When not in use for a long time, unplug the plug from the socket. It may cause electric shock, electric leakage, fire due to aging of the insulation layer.

SEIHO Vietnam is the official distributor of Switle Body in Vietnam.

Contact us now for consultation!

----------------

Address: 25.09 C3 Vinhomes Central Park, 208 Nguyen Huu Canh, Ward 22, Binh Thanh

Hotline: 028 7300 3447